Holts Emergency Puncture Tyre Weld - available at B&M stores

02 July 2017

Try to remove the cause of the puncture, if possible. Using the Holts Tyre Weld, shake the can generously before using and attach to the tyre value using the connector provided. Remove the red tear seal and turn the red button to the ON position. Next allow the can to fully empty, which should take approximately 2 minutes.

You can now remove the Tyre Weld, not forgetting to return the tyre cap. Drive immediately for at least 6 miles at a maximum speed of 50 mph to seal the puncture. You should now be able to drive to the nearest garage to get the puncture repaired.

Benefits of the Holts Tyre Weld:

• - Quick and easy to use in an emergency.
• - Instantly repairs and inflates the tyre to get you back on the road. 
• - 3 different can sizes available to suit various tyre types. 
• - It is a little peace of mind in your boot. 

Holts Tyre Weld should be available at most B&M stores but please contact your local store before visiting to confirm availability.

B&M have a great range of car accessories, to find your nearest store, check out our store finder - https://www.bmstores.co.uk/stores